User Manual

M7CL V3 Editor Owner’s Manual
16
INPUT CH window
This window displays the mix parameters of INPUT CH 1–16, 17–32, or 33–48
(
*
)
. The parameters shown in the
window can be selected from the [View] menu or the menu that appears when you right-click (<control> key +
click) in the window.
You can access this window in the following ways.
● From the [Windows] menu, choose [Overview] and select “CH1-16” / “CH17-32” / “CH33-48”
(
*
)
●
Use the navigation keys in the Master window to turn on the [1-16] button / [17-32] button / [33-48] button
(
*
)
●
On the M7CL itself, assign one of the USER DEFINED KEYS to [1-16]/[17-32]/[33-48]
(
*
)
in [INPUT CH] of [M7CL
EDITOR CONTROL], and execute the function
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog
box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.
A Input patch
Click here to select the input source that will be assigned to the INPUT CH, from the
following choices.
(*) AD33-48(INPUT jack 33-48) can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES”
is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48
or M7CL-48ES.
B HA GAIN
Drag the knob in the screen to adjust the gain of the internal head amp or of the exter-
nal head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the INPUT CH.
C 48V
Switches on/off the phantom power (+48V) of the internal head amp or of the external
head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the INPUT CH.
NONE No assignment
IN1–IN48
(
*
)
INPUT jacks 1–48
(
*
)
STIN1L–STIN4R L/R channels of ST IN jacks 1–4
SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 Input channels of an I/O card installed in slots 1–3
RACK1A, RACK1B...RACK8R(B) L/R outputs of Rack 1–8
Overview window
1
2
3