User Manual

M7CL V3 Editor Owner’s Manual
25
A MIX/CH/ST IN (Send levels from the MIX/INPUT CH/ST IN to
the MATRIX bus)
This switches between indicating the sends from MIX channels 1–16, the sends from
INPUT CH 1–16 / 17–32 / 33–48
(
*
)
, and the sends from ST IN.
The bar graphs located immediately below the button indicate/adjust the level of the
signal that is sent from each channel to the MATRIX bus. The method of operation and
the meaning of the display are the same as for (
5) MATRIX in the MIX window
(➥ p.23).
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in
the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.
B STEREO (Send levels from the STEREO channels to the MATRIX
bus)
Here you can view and edit the send levels of the signals sent from the STEREO chan-
nels to the MATRIX bus. While you drag the bar graph, the send level is shown in the
numerical display area immediately below. The method of operation and the meaning
of the display are the same as for (
5) MATRIX in the MIX window (➥ p.23).
C EQ (Equalizer)
Switches the EQ on/off. The graph immediately below the button shows the approxi-
mate response of the EQ. This is the same as the equalizer for INPUT CH (➥ p.17).
D DYN1(Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT
CH (➥ p.17).
E INS (Insert)
Enables/disables the insert-in.
F SEL (Select)
Selects the MATRIX channel for which you want to make settings.
G CUE
This button cue-monitors the signal of the MATRIX channel.
H ON
This switches the MATRIX channel on/off.
If the corresponding channel is off, the fader will be grayed out.
I Fader
This adjusts the output level of the MATRIX channel. The current fader value is shown
in the numeric box immediately below the fader.
The numbers and alphabetical letters at the right of the fader indicate the mute groups
to which that channel belongs, and show the Recall Safe and Mute Safe status of the
channel. (For the significance of the numbers and alphabetical letters, see ➥ p.18).
J Channel number
Indicates the number of the MATRIX channel. You can double-click this number to
open the Selected Channel window for this channel. If you hold down the
<Ctrl>(< >) key of your computer keyboard and double-click this, the Selected
Channel window will open as an additional view.
4
5
6
7
8
J
3
1
2
9