User Manual

Network-MIDI Driver Installation Guide 10
1 Click the [System Preferences] icon on Dock.
The “System Preferences” window appears.
2 Click the [Network] icon.
The “Network” window appears.
3 Click [Ethernet].
The Ethernet settings appears.
n If there are multiple Ethernet choices, select the one that is connected to the device.
4 Select [Manually] in [Configure IPv4] or [Configuration]. Input the IP address of the computer
in [IP Address], “255.255.255.0” in [Subnet Mask], and the IP address of the router (gateway) in
[Router] individually.
n It is recommended that you set the IP address to “192.168.0.3” when peer-to-peer connecting a single device to a
computer. For details on settings when connecting to multiple devices via a switching hub, refer to the installation
guide for each editor software.
5 Click [Apply].
The network settings are applied.
TCP/IP Settings