Guide

Yamaha Commercial Audio
Live Recording with M7CL or PM5D via Dante
Dante Controller: Config: Rename Device.
If the Sample Rate of the card needs to be changed (from 48k to 96k for
example), the host console will need to be rebooted for the change to take
effect. The “Reboot” option on the “Config” tab will not be sufficient in this
case.
Network Routing
Once all the devices have been named, the audio routing can be set.
To route all channels from the MY16-cards to the computer, first open the
“Device View” for the computer and select the “Receive” tab. Then in the
“Available Channels” column on the right, highlight channels 1-16 from slot 1
(click on “01”, then hold [shift] and click on “16”), and drag them over to the
receive channels on the left side. Drop onto channel 1.
Dante Controller: Receive tab for Computer.
Next, drag all channels from Slot 2 onto computer channels 17-32, Slot 3 onto
33-48 and Slot 4 (if it exists) onto 49-64.
12 www.yamahaproaudio.com