Guide

Yamaha Commercial Audio
Live Recording with M7CL or PM5D via Dante
Another way to make the routing is from the “Routing” tab of Dante Controller.
Press the [+] buttons to expand the view. Check that the computer is
receiving the correct channels from the MY16-cards. By clicking on the
cross-point box while holding [Ctrl], all available channels are routed between
the selected devices. All the device’s routing is removed by clicking on the
box while holding both [Ctrl] and [shift].
Dante Controller: Routing from Mixer Slots to Computer.
PC Playback via Dante
To allow playback from the PC, Dante Controller can be used to route audio
back to the MY16-cards.
In the “Receive” tab of the Device View, drag computer channels 1-16 from
the “Available Channels” column into the “Receive Channels” for Slot1.
Computer channels 17-32 for Slot2, 33-48 for Slot3 and 49-64 for Slot4 (if it is
used).
13 www.yamahaproaudio.com