Guide

Yamaha Commercial Audio
Live Recording with M7CL or PM5D via Dante
The [PRESET] button will recall the default settings, which will be perfect for
most cases. The left-side of the grid shows that all 48 AD Inputs will be
swapped with the inputs from Slots 1-3. Of course, these assignments can be
edited if necessary, allowing for a different patch configuration, or allowing
some recording inputs to be mixed with some microphone inputs. Click [OK]
to close the window, then switch on the “VIRTUAL SOUNDCHECK” function.
Now you are ready to listen to and mix the recording on the PM5D. Switching
off “VIRTUAL SOUNDCHECK” will restore the patch settings of the current
scene. There is a notification area at the top of the PM5D display showing
when this function is enabled.
Playback through M7CL
The mixer’s input channel patch will need to be changed from the internal AD
converters to the digital Slot inputs. To achieve this, it is best to make a new
Scene memory and set the “Scene Focus” so that only “Input Patch” settings
are recalled.
But firstly, store a scene with the current patch settings (analogue inputs to
input channels).
21 www.yamahaproaudio.com