User guide

Yamaha Commercial Audio M7CL StageMix V3.0 User Guide
3.0 Getting Started
3.1 M7CL Network Setup
I. Connect the Wi-Fi access point to the M7CL console’s network port via a
CAT5 cable. Note that a cross-over cable will be needed with older access
points that don’t have the “auto MDIX” function. Most recent devices will
support “auto MDIX”, in which case a straight CAT5 cable can be used.
II. Note the IP address and MAC address of the M7CL console - they will need to
be entered into the iPad later. They can be found in the console as follows:
a. Press the [SETUP] button on the M7CL touchscreen
b. Press [NETWORK] on the M7CL touchscreen
3.2 iPad Wi-Fi Settings
The iPad needs to be given a static IP address in the same range as the
M7CL’s IP Address.
a. Open the iPad “Settings” menu
b. Select “Wi-Fi”, and choose the correct network
c. Press the blue circle with the white arrow to the right of the selected
network to edit the IP address.
d. Select [Static].
Page 5