User Manual

Yamaha Commercial Audio
Dante-MY16-AUD HA Remote Control Guide
8 www.yamahaproaudio.com
Settings for R series
To remote-control the HA of the R series via the Dante-MY16-AUD card, you
should set UNIT ID and the DIP switches at the front panel of the R series as
follows, and then turn on the power.
UNIT ID
A virtual ID as the AD8HR (with eight channels) is decided by the UNIT ID set
here. For example, when you set 1 for UNIT ID, the mixer will recognize the
Rio3224-D as a virtual ID 1 to 4, the Rio1608-D as a virtual ID 1 to 2, and the
Ri8-D as a virtual ID 1.
When you mix different models of the R series or mix other HA equipment
(AD8HR etc.) in the system, please especially ensure that virtual IDs are
unique to each other. Discontinuous UNIT ID and virtual ID numbers (e.g. 1, 3,
4) are acceptable.
UNIT ID
Virtual ID (Hexadecimal)
Rio3224-D
Rio1608-D
Ri8-D
1
1, 2, 3, 4
1, 2
1
2
5, 6, 7, 8
3, 4
2
3
9, A, B, C
5, 6
3
4
D, E, F, 10
7, 8
4
AD8HR mode
AD8HR mode
AD8HR mode
32ch HA
AD8HR x 4
AD8HR x 2
AD8HR x 1
16ch HA
8ch HA
Rio3224-D
Rio1608-D
Ri8-D