User Manual

Example Program for Crestron - Setup Guide -

Step 4: Mixing console MIDI configuration

Parameter change TX and RX should be enabled. All others disabled.

Default MIDI channels are as follows:

LS9 – channel 1

M7CL – channel 2

01V96 – channel 3

The device configuration page on the touch panel has pre-configured MIDI channels for

Yamaha devices. You need to set these identical MIDI channels in to the connected

Yamaha devices. If you require different MIDI channels, these must be modified in the

Crestron source code before compiling.

Important Note:

Note that at the time of writing, if M7CL is used in addition to another mixer, you

MUST use the MIDI-THRU and MERGE units. Daisy-chain connection of MIDI will not

work with the M7CL.

Mixer setup screens:

LS9 MIDI settings M7CL MIDI settings

01V96 MIDI Settings – Setup 01V96 MIDI Settings – Host

Note that Studio Manager does not change the MIDI channel,

so this needs to be configured manually.