User Manual

M7CL V3 Editor Owner’s Manual

❏ Fader

A ON

This switches the MATRIX channel on/off.

B Fader

This adjusts the output level of the MATRIX channel. A meter indicating the signal level

is shown at the right of the fader, and the current value is shown in the numerical box

immediately below. You can set this to the minimum value (–∞ dB) by holding down

the <Ctrl>(< >) key of your computer keyboard and clicking the fader knob, or set it

to the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key

and clicking the fader knob.

C CUE

This button cue-monitors the signal of the MATRIX channel.