User Manual
M7CL V3 Editor Owner’s Manual
7
Working with Sessions
All of your console’s mix settings in M7CL Editor, including Scene and library data, are called Sessions.
The following table describes how to handle Sessions.
When you save a session in the window of an editor, the settings of only that editor will be saved in a file. Session files
saved by M7CL Editor have a filename extension of “.YSE”. Files in which only the M7CL console data is saved (file-
name extension “.M7C”) can also be handled, allowing you to use a USB storage device to exchange data with the
M7CL console.
If you save a Session in the Studio Manager window, all selected Editor settings are saved in a file with a file extension
of “.YSM.”
With M7CL V3 Editor, you can also open files that have been saved on any version of M7CL console or
Editor other than version 3 if the files feature the extension “.M7C” or “.YSE”. However, once you save
these files on the M7CL V3 console or Editor, you will not be able to open them on the other version of
M7CL console or Editor.
If you use the M7CL-48ES console to open a session saved via the M7CL-32/48 console, or if you use the
M7CL-32/48 console to open a session saved via the M7CL-48ES, the patch settings will change and the
same HA settings will be used as follows:
(*) The same HA settings will be used.
Creating a new Session
Choose [New Session] from the [File] menu.
Opening a previously saved Session
Choose [Open Session] from the [File] menu.
Saving the current Session
Choose [Save Session] from the [File] menu.
Saving the current Session with a new name
Choose [Save Session As...] from the [File] menu.
M7CL-32/48 M7CL-48ES
INPUT 1-16
↔
(
*
)
ES IN 1-16
INPUT 17-32
↔
(
*
)
ES IN 17-32
INPUT 33-48
↔
(
*
)
ES IN 33-48
ST IN 1L-4R
↔
(
*
)
OMNI IN 1-8
SLOT1 IN 1-16
↔
(
*
)
SLOT1 IN 1-16
SLOT2 IN 1-16
↔
(
*
)
SLOT2 IN 1-16
SLOT3 IN 1-16
↔
(
*
)
SLOT3 IN 1-16
TALKBACK
↔
TALKBACK
OMNI OUT 1-16
↔
ES OUT 1-16
No assignment
↔
ES OUT 17-24
No assignment
↔
OMNI OUT 1-8
SLOT1 OUT 1-16
↔
SLOT1 OUT 1-16
SLOT2 OUT 1-16
↔
SLOT2 OUT 1-16
SLOT3 OUT 1-16
↔
SLOT3 OUT 1-16
2TR DIGITAL OUT
↔
2TR DIGITAL OUT
NOTE
NOTE