User Manual

M7CL V3 Editor Owner’s Manual
70
C LINK PARAMETER
This section enables you to select the parameters to interlock.
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box.
It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.
The HA and FADER parameters will maintain level differences between linked channels.
D SEND PARAMETER
Specify the link status for each MIX/MATRIX SEND bus.
HA Head amp gain and phantom power settings
AT T Attenuation value
EQ Equalizer settings
DYNAMICS1 Dynamics 1 settings
DYNAMICS2 Dynamics 2 settings
MIX SEND Send amount from input channel to MIX bus
MIX ON MIX SEND on/off
MATRIX SEND Send amount from input channel to MATRIX bus
MATRIX ON MATRIX SEND on/off
FADER Fader level value
CH ON Input channel module output on/off
NOTE