User Manual

M7CL V3 Editor Owner’s Manual

In the Output Port window you can assign the source channel for each output port and set the parameters.

The window includes the following items.

A Output port select tabs

These tabs switch the output ports controlled in the window in groups of up to eight ports.

B DELAY SCALE ﬁeld

Here you can select the units for the delay time shown below the delay time knob (H).

•METER(343.59m/s)

The delay time is shown as a distance in meters, calculated as the speed of sound (343.59 m/s) at an air temperature of 20°C

(68°F) multiplied by the delay time (seconds).

•FEET(1127.26ft/s)

The delay time is shown as a distance in feet, calculated as the speed of sound (1127.26 feet/s) at an air temperature of 20°C

(68°F) multiplied by the delay time (seconds).

•SAMPLE

The delay time is shown as a number of samples. If you change the sampling frequency at which the M7CL operates, the

number of samples will change accordingly.

•msec

The delay time is shown in units of milliseconds. If this button is on, the same value is displayed above and below the delay

time (

G).

C Output port

This indicates the type and number of the output port to which the channel is assigned.

D Channel select button

This button lets you select the channel that is assigned to the output port.

E Channel name

Indicates the name of the channel that is assigned to the corresponding output port.

F DELAY button

Switches the output port delay on/off.

Output Port window