User Manual

7
Recall Safe for the attenuator can now be selected inde-
pendently of EQ.
In addition, the stereo, LINK, RECALL SAFE, and USER
LEVEL behavior of other mixing parameters has also
been changed. For details, refer to the "Mixing parameter
operation applicability" on the back of the included block
diagram.
M7CL V2 Editor now allows you to make the same user-
defined key settings as on the console itself. For details on
how to make these settings, refer to the M7CL V2 Editor
Owner’s manual.
Data created with firmware 2.0 (scenes, library data, setup
data, etc.) cannot be loaded into an M7CL console that is
using firmware V1 (any version prior to V2.0). However,
data created on an M7CL with firmware V1 can be loaded
into an M7CL that is using firmware V2.0.
Recall Safe settings made independently
for the attenuator
Assigning user-defined keys from
M7CL V2 Editor
Function
PARAME-
TER 1
PARAME-
TER 2
Explanation
MONI-
TOR ON
MASTER
(FADER
ASSIGN
MODE)
STEREO
MASTER
LATCH The key will switch
whether the STEREO
MASTER fader will be
used to control the moni-
tor level
UNLATCH The STEREO MASTER
fader will be used to con-
trol the monitor level
while the key is held
down
MONO
MASTER
LATCH The key will switch
whether the MONO
MASTER fader will be
used to control the moni-
tor level
UNLATCH The MONO MASTER
fader will be used to con-
trol the monitor level
while the key is held
down
SENDS
ON
FADER
MATRIX
1-8
–
Switches the MATRIX
ON FADER function on/
off for the selected
MATRIX
MIX ON
FADER
–
Switches the MIX ON
FADER function on/off
MATRIX ON
FADER
–
Switches the MATRIX
ON FADER function on/
off
SENDS ON
FADER
–
Switches the SENDS ON
FADER function on/off
M7CL
EDITOR
CON-
TROL
LIBRARY INPUT CH Opens the M7CL V2 Edi-
tor’s Library window -
INPUT CH tab
OUTPUT
CH
Opens the M7CL V2 Edi-
tor’s Library window -
OUTPUT CH tab
HOME SELECTED
CH VIEW
–
Displays the SELECTED
CHANNEL VIEW screen
OVERVIEW
–
Displays the OVERVIEW
screen
MOMEN-
TARY
–
Each press of the key will
alternately display the
SELECTED CHANNEL
VIEW screen and the
OVERVIEW screen
Functions that can be assigned to
user-defined keys
Compatibility of created data
m7cl_v2_en.fm Page 7 Thursday,June 25, 2009 5:16 PM