User Manual

M7CL V2 Editor Owner’s Manual
16
MIX window
In this window you can view and edit the parameters of MIX channels 1–16. The parameters shown in the window
can be selected from the [View] menu or the menu that appears when you right-click in the window.
You can access this window in the following ways.
● From the [Windows] menu, choose [Overview] and then choose “MIX”
● Use the navigation keys in the Master window to turn on the [MIX] button
A OUTPUT PATCH
Click here to select the output port that will be assigned to the MIX channel, from the
following choices.
If multiple patches have been made, only the first port is shown.
If you change the patching in this window, the port that had been assigned until then
will be cancelled, and only the newly selected port will be assigned.
B EQ (Equalizer)
Switches the EQ on/off. This is the same as the equalizer for INPUT CH (➥ p.12).
C DYN1(Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT
CH (➥ p.12).
D INS (Insert)
Enables/disables the insert-in.
OMNI1–OMNI16 OMNI jacks 1–16
SLOT1-1,
SLOT1-2...SLOT3-16
Input channels of an I/O card installed in slot 1–3
RACK1A,
RACK1B...RACK8R(B)
L/R outputs of Rack 1–8
2TROUT L, 2TROUT R L/R channels of the 2TR OUT DIGITAL jack
4
1
2
3