User Manual

Outputs (SPEAKER OUT)
Output Power
20msec Burst
(THD+N=1%)
AMP MODE = 3Ω 100W x 2ch
AMP MODE = 4Ω 120W x 2ch
AMP MODE = 8Ω 100W x 2ch
AMP MODE = 70V/120W 120W x 2ch
AMP MODE = 100V/120W 120W x 2ch
AMP MODE = 70V/200W 200W x 1ch
AMP MODE = 100V/200W 200W x 1ch
Terminal 7.62mm BARRIER STRIP 4pin
Outputs (THRU OUT)
THRU OUT
Actual source impedance 600Ω
For use with nominal 10kΩ lines
Output Level Nominal -10dBV (316mV)
Terminal MONO RCA PIN x2, Unbalanced
Inputs
LINE IN
Input Level
(INPUT A-B, Euro,
balanced)
Sensitivity +4dBu (1.23V)
Nominal +4dBu (1.23V)
Max before clip +24dBu (12.3V)
Input Level
(INPUT A-B, RCA,
unbalanced)
Sensitivity -10dBV (316mV)
Nominal -10dBV (316mV)
Max before clip +10dBV (3.16V)
Terminal
INPUT A-B 3.5mm Euro Block 6pin x1
balanced
INPUT A-B MONO RCA PIN x2
unbalanced
General Specications
Precautions for rack mounting Rack mountable (Leave more than 1U of
spaces between this unit and others.)
Operating temperature 0°C to +40°C
Storage temperature -20°C to +60°C
Dimensions (W x H x D, not including knob) 480 x 44 x 351 mm
(18.90 x 1.73 x 13.82 inch)
Net Weight 4.8kg
Included Accessories AC power cord (2.0m) x1,
3.5mm Euroblock plug (6pin) x1,
3.5mm Euroblock plug (3pin) x1,
Owner’s Manual x1,
Specification sheet x1
Optional accessories Digital Control Panel
(DCP1V4S-US/EU, DCP4V4S-US/EU,
DCP4S-US/EU)
Electrical Characteristics
Amplier type
(Output circuitry)
Class D
THD+N LINE IN to SPEAKER OUT,
Half power@1kHz
AMP MODE = 3Ω, 4Ω, 8Ω
≤ 0.2%
LINE IN to SPEAKER OUT,
Half power@1kHz
AMP MODE = 70V, 100V/120W
≤ 0.2%
LINE IN to SPEAKER OUT,
Half power@1kHz
AMP MODE = 70V, 100V/200W
≤ 0.2%
Frequency Response LINE IN to SPEAKER OUT,
50Hz to 20kHz@1W
AMP MODE = 3Ω, 4Ω, 8Ω
0dB, -3.0dB, +1.0dB
LINE IN to SPEAKER OUT,
90Hz to 20kHz@1W
AMP MODE = 70V, 100V/120W
0dB, -3.0dB, +1.0dB
LINE IN to SPEAKER OUT,
90Hz to 20kHz@1W
AMP MODE = 70V, 100V/200W
0dB, -3.0dB, +1.0dB
LINE to THRU OUT,
20Hz-20kHz
0dB, -2.5dB, +1.0dB
Load Protection POWER/STANDBY SW on/off Mute the output
Output Voltage Protection Compress output voltage when needed
DC-fault Power Supply shutdown
Amplier Protection Thermal
Limit output " Mute " Shutdown
Over current Mute the output (with automatic restoration)
Integrated Power Limit Compress output
Power Supply
Protection
Thermal Power supply shutdown
Over voltage Power supply shutdown
Over current
Limit power " Power supply shutdown
Cooling Conventional cooling, bottom to up airflow
Controls Front Panel POWER/STANDBY SW,
OUTPUT volume x 2,
BASS EQ volume x 2,
TREBLE EQ volume x 2
Rear Panel SETUP DIP SW x1,
SPEAKER A/B DIP SW x2,
MODE SW x1
Connectors Analog In (MIC/LINE) —
Analog In (LINE) 3.5mm Euro Block 6pin x1 (Rear),
MONO RCA PIN x2 (Rear)
Analog Out MONO RCA PIN x2 (Rear/THRU OUT)
Speakers 7.62mm BARRIER STRIP 4pin x1 (Rear)
Remote RJ45 x1 (Rear/DCP),
3.5mm Euro Block 3pin x1 (Rear/REMOTE)
Indicators POWER x1 (Green/Orange),
OUTPUT SIGNAL x2 (Green),
OUTPUT LIMIT x2 (Red)
AC Power Requirement 100V, 120V, 230V-240V 50Hz/60Hz (*1)
*1 It has confirmed that it is working with
±10% of the voltage of the rated supply
voltage.
Power Consumption Standby, default setting
AMP MODE = All
≤ 1W
Idle
AMP MODE = 3Ω, 4Ω, 8Ω
15W
Idle
AMP MODE = 70V, 100V
20W
1/8 Output, Pink noise
AMP MODE = 4Ω
60W
1/8 Output, Pink noise
AMP MODE = 70V/120W
60W
Specifications
POWER AMPLIFIER
Technical Specifications
VAV9690
Dimensions
45.1
480
44
379.4
430
(unit: mm)
361.8