Owner's Manual
Table Of Contents
- INTRODUCTION
- IMPORTANT MANUAL INFORMATION
- IMPORTANT NOTICE
- TABLE OF CONTENTS
- SAFETY INFORMATION
- LOCATION OF THE WARNING AND SPECIFICATION LABELS
- DESCRIPTION
- INSTRUMENT AND CONTROL FUNCTIONS
- PRE-OPERATION CHECKS
- OPERATION
- RIDING YOUR ATV
- PERIODIC MAINTENANCE AND MINOR REPAIR
- CLEANING AND STORAGE
- SPECIFICATIONS
- CONSUMER INFORMATION
8-11
8
To install the panel
1. Place the panel in the original position, and
then install the quick fastener screws.
2. Install the front carrier stays by installing the
bolts and tightening them to the specified
torque.
3. Install the front carrier by installing the bolts
and tightening them to the specified torques.
1. Panel B
2. Quick fastener screw
Tightening torque:
Front carrier stay bolt:
26 Nm (2.6 m·kgf, 19 ft·lbf)
U3B461E0.book Page 11 Tuesday, November 21, 2006 1:51 PM