Owner's Manual

13 En
OPERATION
English
The setup menu appears on the front panel display by pressing SETUP . You can set various useful functions with setup menu.
*
1
When the input source is set to DAB, and if the unit cannot receive any DAB stations, these setup menus do not appear.
■ Operation procedure
For DAB CLEAR, INIT SCAN and TUNE AID, see page 15.
*
2
When there are some parameters to set, repeat steps 3 and 4. You can go back to a previous parameter by pressing .
*
3
To set additional items, repeat steps 2 to 5.
y
To cancel the setting during the operation, press SETUP.
USING USEFUL FUNCTIONS
Using setup menu
Setup menu Parameter or control range Reference page
PRESET DELETE*
1
(Displays only when the input source is set to DAB/FM.) 12, 15
STATION ORDER*
1
ALPHANUMERIC/ENSEMBLE
(Displays only when the input source is set to DAB.)
15
DRC MODE*
1
AUTO/OFF
(Displays only when the input source is set to DAB.)
15
DAB CLEAR*
1
(Displays only when the input source is set to DAB.) 15
INIT SCAN (Displays only when the input source is set to DAB.) 15
TUNE AID (Displays only when the input source is set to DAB.) 15
DIMMER DIMMER ON (25%)/OFF (100%) 14
TREBLE –6 dB to +6 dB 14
BASS –6 dB to +6 dB 14
BALANCE L+5 - CENTER - R+5 14
AUTO CLOCK ON/OFF 14
CLOCK SET Hour, minute 14
TIMER SET
Time (hour, minute), running time, sound (source, track or preset
number), timer on/off
14
WIRELESS SET GROUP A1/A2/A3/B1/B2/B3 5
POWER SAVING NORMAL/ECO 14
WIRELESS SW NO/YES 14
MCR-140
MCR-140
MCR-140
Press SETUP. Select desired
setup menu.
Confirm with
ENTER.
Change the settings. Complete the
setting.*
3
1 2 3 4 5
Repeat*
2
Exit setup
menu.
6