manual

TROUBLESHOOTING
20 En
In case of a transmission error without a status message appearing in the front panel of this unit, check the connection to the USB device
(see page 9).
No sound.
The iPod sounds, but
you cannot operate it
with the unit or the
remote control.
The iPod is set in the iPod dock
improperly.
Remove the iPod from the unit, then set it in the iPod
dock again.
9
The unit cannot be
operated by the
remote control.
The iPod is not supported by this unit. Only iPod (5th generation), iPod classic, iPod nano,
and iPod touch are supported.
9
The iPod is not connected correctly. Connect the iPod firmly.
—
The iPod software version is out of date. Update the iPod software version to the latest. If the
problem cannot be solved, even with the latest
software, reset the iPod.
—
You cannot operate
from the iPod.
The iPod is set in the iPod dock
improperly.
Remove the iPod from the unit, then set it in the iPod
dock again.
9
The playback
information is not
displayed on the
front panel display.
The iPod you set is not compatible with
the playback information display.
Only iPod (5th generation), iPod classic, iPod nano,
and iPod touch are supported.
9
The iPod does not
charge up.
The iPod is set in the iPod dock
improperly.
Remove the iPod from the unit, then set it in the iPod
dock again.
9
The iPod is not supported by this unit. Only iPod (5th generation), iPod classic, iPod nano
and iPod touch are supported.
9
USB
Note
Status message Cause Remedy page
USB Unplugged
The USB device is not connected
firmly.
Connect the USB device again.
9
No Files
The connected USB device is not
playable on this unit.
Connect playable USB device.
9
The USB device has no data. Connect an USB device with data included.
9
USB OverCurrent
The connected USB device is not
playable on this unit.
Disconnect the USB device. Change input source
other than USB and select USB as input source
again. Then connect playable USB device again.
9
The USB device is connected at an
angle.
Problem Cause Remedy page
MP3/WMA file in the
USB device does not
play.
The USB device is not recognized. Connect the USB device again.
9
Connect an AC adapter if supplied with the device.
—
Improper USB device connections. Connect the USB device again.
9
The MP3 or WMA formats are not
compatible with this unit.
Replace the file with a correctly recorded file
playable with this unit.
3
If the solutions above do not resolve the
problem, the USB device is not playable
on the unit.
Try another USB device.
—
Problem Cause Remedy page