manual

Chapter 10: Initial Settings
55 En
English
■ Subtitle Display
Determines whether DVD-Video disc subtitles are
displayed by default.
• On (default): Subtitles are displayed by default if
available.
• Off: Subtitles are not displayed by default.
Note:
•Some DVD-Video discs may forcibly display
subtitles regardless of this setting.
■ OSD Language
Sets the language of the on-screen menus.
• English (default): English on-screen menus.
• Language: Available languages depends on where
you purchased the DRX-730.
■ Angle Indicator
Determines whether the camera icon ( ) is
displayed on-screen when playing content on a
DVD-Video disc that features multiple camera angles.
• On (default): Camera icon is displayed.
• Off: Camera icon is not displayed.
■ Parental Lock
See “Parental Lock” below.
■ DTS Downmix
Determines how mutichannel DTS audio is
downmixed when the DTS Out setting (see page 52)
is set to DTS > PCM. Select Lt/Rt if your AV
receiver/decoder supports Dolby Pro Logic but not
DTS and it’s connected to the OPTICAL DIGITAL
OUT.
• STEREO (default): Mutichannel DTS is
downmixed in to a 2-channel stereo mix.
• Lt/Rt: Mutichannel DTS is downmixed in to a
matrix-encoded surround mix that is compatible
with Dolby surround matrix decoders.
■ DivX(R) VOD
See “DivX® VOD” on page 56.
DVD-Video discs containing content that may not be
suitable for everyone may use the parental lock system
to restrict viewing. (See the disc’s case for details.) You
can set the DRX-730 so that discs with a high parental
lock level cannot be played without first entering a
password. There are eight parental lock levels.
In addition, some DVD-Video discs use country or
region codes to block unsuitable content based on the
country or region that you set on the DRX-730.
To use pare ntal lo ck, you must first enter a password,
set the parental lock level, and specify your country or
region. By default, no password is set.
• Password: Used to set the password.
• Level Change: Used to set the parental lock level.
• Country Code: Used to specify your country or
region.
■ Setting the password
You mus t s et a password before the Level Change and
Country Code settings can be set.
1 Select “Password,” and then press ENTER.
2 Use the number buttons to enter a 4-digit
password.
The numbers appear on-screen as asterisks (*).
3 Press ENTER to set the password.
The password is set.
Notes:
•We recommend that you make a note of the
password. If you forget it, you’ll need to reset the
DRX-730 (see page 61) and set a new password.
•When the password and parental lock level have
been set, when you attempt to play a disc that
exceeds the set parental lock level, you’ll be
prompted to enter the password and playback will
not be possible unless you enter the correct
password.
•Instead of preventing disc playback completely,
some DVD-Video discs may just skip unsuitable
scenes.
•Not all DVD-Video discs support parental lock
and those that don’t can be played regardless of
these parental lock settings.
Display settings
Option settings
Parental Lock
10