Owner's Manual

14 En
When you press OPTION , the option menu will appear in the front panel display, allowing you to make the following settings.
(eject button) cannot be operated while the option menu is displayed.
*1
North America model only
*2
Default setting
 Procedure for settings
USEFUL FUNCTIONS
Using the Option menu
Option menu Setting or range See page
PRESET DELETE
Deletes a stored preset (shown only if the audio source is FM/AM
*1
).
12
DIMMER
Adjusts the brightness of the front panel display (1
*2
: bright, 2: medium, 3: dim).
–
EQ LOW
Adjusts the tonal character (low frequencies) (–10 - 0
*2
- +10 dB).
–
EQ MID
Adjusts the tonal character (mid frequencies) (–10 - 0
*2
- +10 dB).
–
EQ HIGH
Adjusts the tonal character (high frequencies) (–10 - 0
*2
- +10 dB).
–
BALANCE
Adjusts the volume balance of the left and right speakers (L+10 - CENTER
*2
- R+10).
–
POWER SAVING
Switches the standby state, NORMAL or ECO
*2
(power saving mode)
5
AUTO PWR
STDBY
You can specify the time after which the unit will turn off automatically.
If no operation occurs for the duration you specify, the unit will turn off automatically
( TIME 12H : 12 hours, TIME 8H
*2
: 8 hours, TIME 4H : 4 hours, TIME 2H : 2 hours, OFF : the unit
will not turn off).
–
CLOCK SET Sets the date and time.
6
ALARM SET Sets the alarm.
16
BLUETOOTH
Connects this unit and your device via Bluetooth (ON
*2
: enable, OFF: disable).
9
1 Press OPTION.
The option menu will appear.
2 Press S /T to select the menu item that you
want to set, and then press ENTER.
3 Press S /T to edit the setting, and then press
ENTER to confirm the setting.
If you want to continue making other settings, repeat the
procedure from step .
4 Press OPTION to exit the option menu.
If you decide to cancel without changing the setting, press
OPTION before confirming the change.
1
3
4
2
2