Owner's Manual

5 En
CONNECTIONS
English
 USB device
 External devices
This unit has the following two types of standby state. Select the mode in POWER SAVING settings menu (☞ P. 14).
* Default setting
Connecting the power cable
When you’ve completed all connections, connect the
supplied power cable to AC IN, and then connect the plug of
the cable to an AC outlet.
Other connections
Rear panel
To AC outlet
Connect your USB device to the USB port on the top panel.
For details on playable files, refer to “NOTES ON DISCS
AND USB DEVICES” (☞ P. 21 ).
The USB device is automatically charged when this unit is
connected to the AC outlet.
• Stop playback before disconnecting the USB device.
• Charging may not be possible depending on the USB device.
Using a commercially available 3.5 mm stereo mini-plug
cable, connect your external device to the AUX jack on the
rear panel of this unit.
About the standby state
Mode
Setting menu
(POWER
SAVING)
Clock display
Bluetoot h
connection
Charging of USB
devices
Alarm setting
ECO standby
*
(power saving mode)
ECO No clock display Disable Enable Disable
Standby NORMAL Show Enable Enable Enable
How to use the remote control
Rear panel
Within 6 m (20')
Battery insulation sheet: Remove before using.