User Manual

28 En
More on playback
Option menu
The option menu allows you to configure the unit to suit how you
will use it.
1 Press OPTION.
The option menu list is shown in the front panel display.
Refer to “Option menu list” (& p. 28).
2 Select a desired option menu with q/w and
press a/d.
3 Change the setting with q/w and press
a/d.
• Repeat step 3 if there is a sub menu.
• Press f to cancel the setting and return to the
previous level.
• Repeat steps 2 and 3 if you want to set another menu
item.
4 Press OPTION to exit the option settings.
* Only when a DAB station is tuned in (CRX-B370D).
Option
BT Standby
Option menu list
Menu Default Function
Initial Scan
*
(& p. 19)
Scan all receivable DAB
frequencies and register
them in the unit.
DAB Tune Aid
*
(& p. 21)
Show the level of received
DAB signal.
Balance (& p. 27) center
Adjust the volume balance of
the left and right speakers.
AutoPowerStdby
(& p. 15)
On
Set the unit to enter standby
mode automatically.
BT Standby
(Bluetooth standby)
On
When a Bluetooth device is
connected to this unit while
the unit is in standby mode,
the unit will be turned on
automatically.
Bluetooth On
Enable/disable the Bluetooth
function.
InitializeSet
Reset to the factory default
settings.
OPTION
q
/
w
a
/
d
f