manual

27 En
FM/AM Tuning
English
TUNER
OPERATIONS
Follow the procedure below to preset radio stations
automatically.
1 Rotate INPUT on the front panel of the receiver
to select “TUNER” as an input source.
2 Hold down MEMORY for more than two
seconds.
The AUTO and MEMORY indicator flash in the front
panel display.
• Auto Preset starts at the lowest frequency toward
the highest frequency.
• The receiver automatically applies a preset number
to each detected station.
You can preset up to 40 of AM and FM stations with Auto Preset.
You can also store up to 40 stations (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups)
manually.
1 Tune into a radio station you want to preset.
See page 26 for tuning instructions.
2 Press MEMORY.
The MEMORY indicator flashes in the front panel
display for about 5 seconds.
3 Hold down PRESET/TUNING u / d to select
a preset station group (A to E) while the
MEMORY indicator is flashing.
4 Press PRESET/TUNING u / d repeatedly to
select a preset station number (1 to 8) while
the MEMORY indicator is flashing.
5 Press MEMORY while the MEMORY indicator
is flashing.
The PRESET and MEMORY indicators light up in
the front panel display.
6 Repeat steps 1 to 5 until all desired stations
are preset.
Automatic preset tuning
Note
MIN MAX
VOLU ME
INPUT
BALANCE
LR
TREBLEBASS
PHONES
STANDBY/ON
TIMER
DISPLAY MEMORY
NATURAL SOUND STEREO RECEIVER RX-E410
PRESET/BAND PRESET/TUNING
PURE DIRECT
HOURTIMER
TIME ADJ MIN
AUTO/MAN'L
MEMORY
INPUT
Manual preset tuning
MIN MAX
VOLU ME
INPUT
BALANCE
LR
TREBLEBASS
PHONES
STANDBY/ON
TIMER
DISPLAY MEMORY
NATURAL SOUND STEREO RECEIVER RX-E410
PRESET/BAND PRESET/TUNING
PURE DIRECT
HOURTIMER
TIME ADJ MIN
AUTO/MAN'L
MEMORY PRESET/TUNING u / d