manual

31 En
Radio Data System Tuning (U.K. and Europe Models Only)
English
TUNER
OPERATIONS
■ Additional CT (clock time) settings
You can use CT information received from the Radio Data
System stations to adjust the built-in clock of the receiver.
1 While tuning into a Radio Data System
station, press DISPLAY repeatedly so that the
clock appears in the front panel display of
the receiver.
2 Press FREQ/TEXT once.
“CT→Clock” appears in the front panel display.
3 Press PTY SEEK MODE repeatedly to select
“CT→Clock” or “Local CT”, and then press
PTY SEEK START to switch the setting
between “ON” and “OFF”.
CT→Clock
Set this to “ON” if you want to apply CT information
received from the Radio Data System stations to the
built-in clock of the receiver. (The default setting is
“ON”.)
Local CT
Set this to “ON” if you want to apply the daylight
saving time or summer time to CT information
received from the Radio Data System stations. (The
default setting is “ON”.)
4 Press FREQ/TEXT to confirm the settings.
STANDBY/ON
1234
56
90
78
DIMMER
REPEATPROG
FREQ/TEXT
TIME/INFO
PTY SEEK
MODE START
RANDOM
MENU
FOLDER/PRESET
ENTER
FILE
/A-E
FILE
/A-E
DISPLAY
SLEEP
CD TUNER BAND
TAPE/MD AUX/TV DOCK
INPUT VOLUME
STANDBY/ON
1234
56
90
78
DIMMER
REPEATPROG
FREQ/TEXT
TIME/INFO
PTY SEEK
MODE START
RANDOM
MENU
FOLDER/PRESET
ENTER
FILE
/A-E
FILE
/A-E
DISPLAY
SLEEP
CD TUNER BAND
TAPE/MD AUX/TV DOCK
INPUT VOLUME
FREQ/TEXT
PTY SEEK START
PTY SEEK MODE
DISPLAY
TUNER