User Manual

Connecting to a network
19 En
Connecting to a
wireless network
Setup can be performed using a WPS (Wi-Fi Protected
Setup) button, or by sharing settings from an iOS device
(iPhone, etc.).
• A wireless router (access point) with a WPS button is
required.
1 Press .
2 Select [Network Config] with S/T,
and press .
3 Select [Select Network] with S/T,
and press .
4 Select [Wireless] with S/T, and press
.
5 Select [WPS] with S/T, and press .
6 Press the WPS button on the wireless
router (access point).
• Once connected, the Wi-Fi indicator stays lit.
Setup using a WPS button
2, 3, 4, 5

/

,
ENTER
1
OPTION
About WPS
WPS (Wi-Fi Protected Setup) is a standard established by
the Wi-Fi Alliance, which allows easy establishment of a
wireless home network.
• You cannot simultaneously use this setting with
a wired network connection or Wireless Direct
(& P.39).
• If the unit is placed far away from the wireless
router (access point), a connection may not be
able to be established. In that case, place them
closer together.
Note