User Manual

Configuring network connection
20 En
1 Press .
• The option menu is shown on the front panel
display.
2 Select [Network Config] with S/T,
and press .
3 Select [Select Network] with S/T,
and press .
4 Select [Direct] with S/T, and press
.
5 Select desired security method with
S/T, and press .
• Available choices are: [OPEN], [WPA2-PSK(AES)]
6 Check the SSID and the security key.
• These values are required for Wi-Fi setting of the
mobile device.
• You can check the value from the option menu -
[Network Info] - [Direct Info].
7 Configure the Wi-Fi setting of the
mobile device.
• Enable the Wi-Fi function of the mobile device.
• When the access points are listed, select the SSID
you have checked in step 6.
• When the terminal prompts you to enter a
password, enter the security key you have
checked in step 6.
S/T
ENTER
2, 3, 4, 5
OPTION
1
• If you select [OPEN] in step 5, the connection may
be insecure since the communication is not
encrypted.