Owner`s manual

4 Enter the clientls
IP
address.
Press A / v to select numbers and </>to
move the cursor to the left or right.
Be sure to enter all four numbers.
5 When you have finished, press SELECT
to confirm the IP address.
6 Press A I v to choose "Save & Network
Restart" and press SELECT.
The client resets its network hardware.
...
~~!
II
~:!
..
~:!
..
~:!
]
;i:
Sal.)E:.flh::lt.l.:.!ot···k
r·E:I:::.
t..::lrt.
CaneE::].
To
cancel without making any changes, choose
"Cancel" and press SELECT.
Setting the subnet mask address
You
can manually enter the subnet mask. This
setting is only possible when the DHCP mode is set
to "NO".
You
must enter the subnet mask exactly as it appears
on your server.
To
view the server's subnet mask,
see the
MCX-I000
Owner's Manual, page 112.
1 Select "Setup" > "Network" > "Manual
Setup" from the Top Menu.
2 Press A
Iv
to choose "Subnet Mask"
and press SELECT.
CONFIGURING THE CLIENT
3 Move the cursor to the subnet mask
field and press SELECT.
Save&Net.work
rest.art.
C.:~nCE:I].
4 Enter the subnet mask address.
Preee A / v to select numbers and </>to
move the cursor to the left or right.
Be sure to enter all four numbers.
5 When you have finished, press SELECT
to confirm the subnet mask address.
6 Press A I v to choose "Save &Network
Restart" and press SELECT.
The client resets its network hardware.
[ [!..
~~II
[III
[I]
:;
Sal.)E:{J·iElt.l.=.!or-k
r·E:lst.art.
C.::lnCEI].
To
cancel without making any changes, choose
"Cancel" and press SELECT.
27
4 Enter the clientls
IP
address.
Press A / v to select numbers and </>to
move the cursor to the left or right.
Be sure to enter all four numbers.
5 When you have finished, press SELECT
to confirm the IP address.
6 Press A I v to choose "Save & Network
Restart" and press SELECT.
The client resets its network hardware.
...
~~!
II
~:!
..
~:!
..
~:!
]
;i:
Sal.)E:.flh::lt.l.:.!ot···k
r·E:I:::.
t..::lrt.
CaneE::].
To
cancel without making any changes, choose
"Cancel" and press SELECT.
Setting the subnet mask address
You
can manually enter the subnet mask. This
setting is only possible when the DHCP mode is set
to "NO".
You
must enter the subnet mask exactly as it appears
on your server.
To
view the server's subnet mask,
see the
MCX-I000
Owner's Manual, page 112.
1 Select "Setup" > "Network" > "Manual
Setup" from the Top Menu.
2 Press A
Iv
to choose "Subnet Mask"
and press SELECT.
CONFIGURING THE CLIENT
3 Move the cursor to the subnet mask
field and press SELECT.
Save&Net.work
rest.art.
C.:~nCE:I].
4 Enter the subnet mask address.
Preee A / v to select numbers and </>to
move the cursor to the left or right.
Be sure to enter all four numbers.
5 When you have finished, press SELECT
to confirm the subnet mask address.
6 Press A I v to choose "Save &Network
Restart" and press SELECT.
The client resets its network hardware.
[ [!..
~~II
[III
[I]
:;
Sal.)E:{J·iElt.l.=.!or-k
r·E:lst.art.
C.::lnCEI].
To
cancel without making any changes, choose
"Cancel" and press SELECT.
27