User's Manual

8
■ MCX-A300/MCX-P200 (Network Music Player)
Back (MCX-A300)
Back (MCX-P200)
A WPS setup button
Press to set the Music Player to the WPS setup mode.
B USB port
For connecting a USB storage device.
C REMOTE CONTROL OUT jacks
(MCX-P200 only)
For connecting IR flashers.
D POWER switch
Turns on/off the Music Player.
E Adapter connector (DC IN 19V)
For connecting the AC adapter.
F AUDIO (L/R) jacks (MCX-P200 only)
For connecting an external amplifier (RX-V1900, etc).
G SUBWOOFER (OUT) jack
For connecting a subwoofer.
H SPEAKERS terminal (MCX-A300 only)
For connecting front right and left speakers.
I DOCK terminal
For connecting an optional iPod universal dock (YDS-
11, etc) or Bluetooth wireless audio receiver (YBA-10,
etc).
J NETWORK port
For connecting the Music Player to the network using a
network cable (CAT-5 or higher straight cable).
POWER
USB
WPS
(LAN)
NETWORK DOCKSPEAKERS SUBWOOFEROUT
DC IN 19V
OFF ON
 

POWER
USB REMOTECONTROLOUT WPS
(LAN)
NETWORK DOCK
SUBWOOFERAUDIO
PREOUT
DC IN 19V
OFF ON
 


Cautions
• Never connect the speaker outputs to another
amplifier, as this may cause a malfunction, seriously
damage the MCX-A300 or amplifier, or cause a fire.
• Be sure to use speakers with impedance of 6 ohms or
over.
EN_02MC2_OM_U.fm Page 8 Tuesday, March 10, 2009 3:51 PM
Black process 45.0° 240.0 LPI