Owner's manual

E-14

MONITOR OUT

When a disc is not loaded, you can use the monitor out

function to monitor the sound of the input source.

1 Press to remove the disc.

2 Press INPUT repeatedly to select the input

connected to the sound source you want to

monitor.

3 Press REC/PAUSE.

“Monitor Out” appears in the display.

Sound from the selected input will be output from this

unit’s analog and digital output terminals.

4 Start playing the sound source.

The sound is output from the MD recorder’s analog and

digital output terminals.

To cancel

Press &.

Notes

• This function is useful to monitor the sound of an external

digital component connected to the DIGITAL OPTICAL 2

IN jack.

• The digital volume can be adjusted when using the

monitor out function. However, please note that the digital

volume setting is restored to the default (0 dB) the next

time a recording is made.

STANDBY/ON

NATURAL SOUND MINIDISC RECORDER MDX-E100

INPUT

ANALOG DIGITAL

REC LEVEL

MIN MAX

REC/PAUSE

–

PROTECTING A RECORDED MD

Tab

Slide the tab to

open the slot.

• To protect a recorded MD, slide the tab on the side of

the MD to open the slot.

In this position, the MD cannot be used for recording,

editing, or titling. To record, edit, or title the MD,

slide the tab to close the slot.

• If the MD is protected against erasure, “Protected”

appears in the display.