User Manual

Front & Rear Panels
MG206C/MG166CX/MG166C Owner’s Manual
Reference
18
C Master SEND Controls (AUX, EFFECT)
Adjusts the signal level sent to the SEND (AUX, EFFECT)
jacks.
If you are using the MG166CX, the Master SEND
control (EFFECT) does not affect the level of the sig-
nal sent from the EFFECT bus to the internal digital
effect processor.
D MONITOR/PHONES
• MONITOR switches
These switches select the signal sent to the MONITOR OUT
jacks, PHONES jack and the level meter from STEREO L/R
bus, GROUP 1/2 bus or GROUP 3/4 bus.
STEREO L/R bus: STEREO ( )
GROUP 1/2 bus: GROUP ( ), 1-2 ( )
GROUP 3/4 bus: GROUP ( ), 3-4 ( )
• MONITOR Control
Controls the level of the signal output to the PHONES jack
and the MONITOR OUT jacks.
E 2TR IN
• 2TR IN Switch
If this switch is set to TO MONITOR ( ), the signals input
via the 2TR IN jacks are sent to the MONITOR OUT jacks,
the PHONES jack, and the level meter. If it is set to TO STE-
REO ( ), the signals are sent to the STEREO L/R bus.
• 2TR IN Control
Adjusts the level of the signal sent from the 2TR IN jacks.
The following illustration shows how the switch settings cor-
respond to the signal selection.
*: When overdubbing, you can adjust the levels of the mon-
itor playback signal and the signal being recorded separately.
MONITOR MIX Signal Flow
If the input channel PFL switch is on ( ), then only
the PFL output from that channel is sent to the MON-
ITOR OUT jacks, PHONES jack, and level meter.
F GROUP 1-2 Fader
Adjusts the signal level sent to the GROUP OUT 1/2 jacks.
G GROUP 3-4 Fader
Adjust the signal level to the GROUP OUT 3/ 4 jacks.
H ST Switch
If this switch is on, the signals are sent to the STEREO L/R
bus via the GROUP 1-2 fader or GROUP 3-4 fader. The
GROUP 1 and 3 signals go to STEREO L and the GROUP 2
and 4 signals go to STEREO R.
I STEREO OUT Master Fader
Adjusts the signal level sent to the STEREO OUT jacks.
Switches
Signals output via the
MONITOR/PHONES
jacks
PFL
MONITOR/
PHONES
2TR IN
ON
— — PFL
OFF
STEREO
TO STEREO
STEREO (+ 2TR IN)
TO MONITOR
STEREO + 2TR IN
*
GROUP
1-2
TO STEREO
GROUP 1-2
TO MONITOR
GROUP 1-2 (+ 2TR IN)
3-4
TO STEREO
GROUP 3-4
TO MONITOR
GROUP 3-4 (+ 2TR IN)
NOTE
Playback
signal
Recording
signal
2TR IN
2TR IN control
STEREO OUT Master fader
MONITOR/PHONES controls
STEREO
bus
REC OUT
jacks
MONITOR
OUT/PHONES
jacks
NOTE