User Manual

MG12XUK Owner’s Manual
11
Quick Start Guide
8. Turn on the power to the connected devices in the
following order: (microphone), (instru-
ment), (audio device)  [ / ] (this unit) 
(speakers).
NOTICE
Follow this order to prevent any loud, unexpected
noise from the speakers. Reverse the order when
turning the power off.
9. Set the [STEREO LEVEL] knob to the “” position.
10. For channels to which a microphone is connected,
set the [GAIN] knob to roughly the 12 o’clock posi-
tion.
11. Set the [LEVEL] knob of each channel in use to the
“” position.
12.While playing your instrument or speaking into the
microphone, raise the volume of the powered
speaker or amplifier until the desired volume is
reached.
NOTE
If the sound is not heard or the sound is distorted, follow the
instructions on page 18.
13.Set the [LEVEL] knobs as necessary to adjust the
volume balance between the corresponding chan-
nels.
This completes the STEP 2 instructions.
NOTE
The volume can be adjusted by using three functions; [PAD],
[GAIN], and [LEVEL]. Once you set the [PAD] switch and the
[GAIN] knob, avoid adjusting those controls as much as possible.
Instead normally use the [LEVEL] knob to adjust the volume. For
details about each function, see the “Controls and Functions” sec-
tion.