Specification Sheet

Technical Data Sheet
2 / 6
Mixing Console MG10
Specifications 1/2
General Specifications
INPUT CHANNELS LINE INPUT 10 (4 MONO + 3 STEREO)
MIC INPUT 4
MONO INPUT (MIC/LINE) 4 (CH1-4)
MONO/STEREO INPUT (MIC/LINE) 0
STEREO INPUT (LINE) 3
OUTPUT CHANNELS STEREO OUT 2
MONITOR OUT 1
AUX SEND 1
GROUP OUT 0
PHONES OUT 1
BUS STEREO 1
GROUP 0
AUX 1
USB AUDIO - USB IN/OUT No
PHANTOM POWER +48V
POWER REQUIREMENTS May vary depending on region (120/60Hz, 220V/60Hz, 220V/50Hz, 230V/50Hz, 240V/50Hz)
POWER SUPPLY TYPE AC Adapter PA-10 (AC 38VCT, 0.62A) or equivalent recommended by Yamaha
POWER CONSUMPTION 22.9W
DIMENSIONS W x D x H 244mm x 294mm x 71mm (9.6" x 11.6" x 2.8")
NET WEIGHT 1.9kg (4.19lbs)
INCLUDED ACCESSORIES AC Adaptor, Owner’s manual, Technical Specifications
SOFTWARE APPLICATION Steinberg CUBASE AI No
Steinberg CUBASIS LE No
MG REC/PLAY (WAV) No
OPTIONAL ACCESSORIES BMS-10A Mic Stand Adaptor
OPERATING TEMPERATURE 0 to 40˚C
Featured Functions
D-PRE MIC PREAMP Yes
1-KNOB COMP Yes
SPX DIGITAL EFFECTS No
Electrical Specifications
TOTAL HARMONIC +14dBu (20Hz to 20kHz) 0.02%
DISTORTION Gain knob: Min
+24dBu (1kHz) 0.003%
Gain knob: Min
FREQUENCY RESPONSE +0.5/-1.0dB (20Hz - 48kHz), refer to the nominal output level @1kHz, GAIN knob: Min
HUM & NOISE LEVEL Equivalent input noise -128 dBu (Mono Input Channel, Rs: 150Ω, Gain knob: Max)
Residual output noise -102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
CROSSTALK @ 1kHz -83dB
INPUT CHANNEL PAD 26dB
FUNCTION HPH 80Hz, 12dB/oct (Mono)
COMP 1 knob compressor
Threshold: +22dBu to -8dBu, Ratio: 1:1 to 4:1
Output level: 0dB to 7dB
Attack time: approx. 25msec
Release time: approx. 300msec
INPUT CHANNEL EQ High ±15dB (10kHz shelving)
Mid ±15dB (2.5kHz peaking)
Low ±15dB (100Hz shelving)
LED LEVEL METER Pre Monitor Level 2 x 7 points LED meter (PEAK, +10, +6, 0, -6, -10, -20dB)
PEAK LED LED turns on when post EQ signal reaches 3dB below clipping level