User Manual

MGP16X/MGP12X Owner’s Manual

Controls and Connectors

Meter/PHONES section

q PHONES jack

Connect a pair of headphones to this TRS phone jack. The

PHONES jack outputs the same signal as the MONITOR

OUT jacks.

w POWER indicator

This indicator lights up when the mixer’s power is ON.

e Level meter

This LED meter displays the level of the signal output from

the STEREO OUT jack, or the signal selected by the 2TR IN

switch and PFL/AFL switch.

The “0” segment corresponds to the nominal output level.

The PEAK segment lights when output reaches the clipping

level.

NOTE

The PFL signal has display priority when an input channel’s

PFL switch is on ( ).

r MONITOR/PHONES control

Controls the level of the signal output to the PHONES jack

and the MONITOR OUT jacks.

RETURN/2TR IN section

q RETURN

• AUX1, AUX2 controls: Adjust the level at which the L/

R signal received at the RETURN jacks (L

(MONO) and R) is sent to the AUX1 and AUX2

buses.

• STEREO control: Adjusts the level at which the signal

received at the RETURN jacks (L (MONO) and

R) is sent to the STEREO L/R bus.

NOTE

If you supply a signal to the RETURN L (MONO) jack only, the

mixer sends the same signal to both the L and R Stereo buses.

w 2TR IN

• 2TR IN switch: If this switch is set to TO MONITOR

( ), the signals input via the 2TR IN jacks or

the iPod/iPhone are sent to the MONITOR OUT

jacks, the PHONES jack, and the level meter. If it

is set to TO STEREO ( ), the signals are sent

to the STEREO L/R buses.

• 2TR IN control: Adjusts the level of the signal sent

from the 2TR IN jacks or the iPod/iPhone to the

STEREO L/R buses.