User Manual

DGX-670 Owner’s Manual

Basic Operations

Copying or Moving Files

You can copy or cut files and paste them to another location (folder). You can also copy folders (but not

move them) by using the same procedure.

NOTE

• Files in the Preset tab and the PianoRoom folder (page 37) cannot be moved.

• Protected Songs such as preset Songs copied to the User tab are indicated by “Prot.1” above the Song name on the Song Selection

display. These cannot be copied or moved to USB flash drives.

1 In the File Selection display, select the appropriate tab (Preset, User or USB1) which

contains the file/folder you want to copy by using the TAB [L][R] buttons.

2 Make sure that the File Management menu is shown at the bottom of the display.

If the menu is not shown, press the [8D] (File) button to call it up.

3 Press the [3D] (Copy) button to copy or [2D] (Cut) button to move.

The window for the Copy/Cut operation appears at the bottom of the display.

4 Move the cursor to the desired file/folder by using the Cursor buttons

[

U][D][L][R], and then press the [ENTER] button.

Pressing the [ENTER] button selects (highlights) the file/folder. To cancel the selection, press

the [ENTER] button again.

Press the [8

D] (All) button to select all files/folders indicated on the current display including

the other pages. To cancel the selection, press the [8

D] (All Off) button again.

NOTE

To cancel the Copy/Move operation, press the [6D] (Cancel) button.

5 Press the [7D] (OK) button to confirm the file/folder selection.

6 Select the destination tab (User or USB1) to paste the file/folder, by using the TAB

[L][R] buttons.

If necessary, select the destination folder by using the Cursor buttons [U][D][L][R], and

then press the [ENTER] button.

7 Press the [4D] (Paste) button to paste the file/folder selected in step 4.

If the file/folder name already exists, a message appears asking you if you want to overwrite or

not. If not, press one of the [6

UD] (No) buttons and enter another name.

The pasted file/folder appears on the display at the appropriate position among the files in

alphabetical order.

Cut Copy