User guide

You can select any pair of inputs on the mLAN16E
card that suits you. These would typically be so
you could monitor the signal.
The signal comes back to one of the four-mLAN
AUDIO IN screens:
Signal sent on ASIO mLAN 07 (&08) coming into
mLAN4 (is shown in the bottom screen shot
above) is heard as audio coming back to the Motif
ES. Here I have added Reverb to it (30) – most
often you record without printing reverb but
during tracking and overdubbing you can monitor
using the Motif ES’s powerful System effects.
Whether or not you hear the System Effects
added here will be controlled by the “mLAN
Monitor Switch” setting, found in UTILITY> F2 I/O
> SF2 OUTPUT:
If the mLAN
MonitorSw is
OFF (as
shown) you are
hearing signal coming back from SONAR – post
the recorder (you will hear the reverb if you add
it). When the mLAN Monitor Switch is ON you are
monitoring the mLAN signal being sent from the
mLAN16E to Sonar (you will hear the “dry” send
signal). When the Monitor Switch is ON you can
hear the individual assignable outputs that you
are routing to the software. You have great
flexibility in sending and returning audio to and
from your DAW software.
21