User Manual

10 MLA-200 Owner’s Manual
Installing onto an instrument
Installation conditions
• Install so that the cables on the side
panel face downward.
• Install so that there is no interference
with headphones or connectors on the
instrument.
• Be sure to use the included screws for
the installation.
• Install the screws at least 15 mm inside
the edge of the leg or stand of the
instrument onto which the MLA-200 is
mounted.
Installation examples
Mounted with screws at the top
Mounted with screws on the side
Mounted with screws at the
bottom
CAUTION
Make sure that installation of the
MLA-200 onto the instrument is
performed by a professional installer.
For the installer:
For details on installing, be sure to refer to
the Setup Guide.
15 mm
or more
15 mm or more