User Manual

MLC-200 Installation Guide – 21

9. Installing onto an instrument — continued

Mounted with screws on the side

Use this installation method when the instrument stand is toward the back of the keyboard.

As described in “Installation precautions (attaching to the instrument with included screws)” (Page 20),

maintain a distance of 15 mm or more between the center screw and the edge of the stand, and install by

using all four screws.

Mounted with screws at the bottom

If the instrument has a thin stand, mount the MLA-200 with the screws at the top, or at the bottom using this installation

method. With this method, also maintain a distance of 15 mm or more between the center screw and the edge of the

stand, and install by using all four screws, as described in “Installation precautions (attaching to the instrument with

included screws)” (Page 20).

15 mm or more