Owner`s manual

Appendix
Display Messages
222
Owner’s Manual
Please stop sequencer. The operation you’ve attempted to execute cannot be done during Song/Pattern playback.
Power on mode stored The setting of the program number automatically selected when turning the power on has been stored.
Read only file. You have attempted to delete, rename, or overwrite a read-only file.
Receiving MIDI bulk The MO is receiving MIDI bulk data.
Recording stopped The recording has been stopped since the memory became full.
Scene & Arpeggio type stored The Song Scene and current Arpeggio type have been stored to one of the [SF1] – [SF5] buttons.
Seq memory full.
The internal memory for Sequence data is full, preventing any further operation (such as recording, editing, Job
execution, MIDI reception/transmission, or loading from the USB storage device). Try again after erasing unwanted
Song, Pattern, or User phrase data.
System memory crashed. Writing data to Flash ROM has failed.
This performance uses user voices.
The performance you have loaded includes User voice data. Check whether the voice you saved exists at the
appropriate User voice bank.
Too many favorites You’ve attempted to assign more than 257 voices to the Favorite category.
Too many fixed notes
When converting the song or pattern data to the Arpeggio data, the amount of different notes in the data to be
converted has exceeded sixteen.
Transmitting MIDI bulk The MO is transmitting MIDI bulk data.
Unknown file format. File format is not recognized.
USB connection terminated. Press
[ENTER].
A break in the connection with the USB storage device has occurred because of an abnormal electric current.
Disconnect the USB storage device from the USB TO DEVICE connector, then press the [ENTER] button.
USB device connecting Recognizing the USB storage device connected to the USB TO DEVICE terminal.
USB device full.
The USB storage device is full and no more data can be saved. Use a new USB storage device, or make space by
erasing unwanted data from the USB storage device.
USB device not ready. A USB storage device is not properly inserted in or connected to the MO.
USB device read/write error. An error occurred while reading or writing to/from a USB storage device.
USB device unformatted. The disk is not formatted, or the format is unusable by the MO.
USB device write protected. The USB storage device is write protected, or you have attempted to write to a read-only medium such as CD-ROM.
USB power consumption exceeded.
The power consumption of the USB storage device connected to the USB TO DEVICE connector exceeds the
regulated value.
USB transmission error An error occurs when communicating with the USB storage device.
Utility stored The settings in the Utility mode have been stored.
LCD Indication Explanation