Owner`s manual

Quick GuideEditing a Program
Editing a Voice
57
Owner’s Manual
Drum Voice Edit
If you want to edit the sounds that make up a Drum Voice and the basic parameters that determine the sound, such as
Oscillator, Pitch, Filter, Amplitude, and EG (Envelope Generator), call up the Key Edit display. To edit more global parameters
related to the overall Drum Voice and how it’s processed, such as Arpeggio, Controller, and Effects, call up the Common Edit
display.
The main parameters available are basically the same as in
the Normal Voice Edit (page 53). What is called Key Edit in
the Drum Voice corresponds to Element Edit in the Normal
Voice. Please keep in mind that the LFO parameters are
not available in the Drum Voice.
Enter a name for the Voice from the NAME display
([COMMON]
→ [F1] GENERAL → [SF1] NAME). For
detailed instructions on naming a Voice, refer to page 38 in
the Basic Operation section.
The edited Voice can be stored in the Voice Store mode.
See page 60 for details.
1
Press the [VOICE] button to enter the Voice mode, then select a Drum Voice to be edited.
2
Press the [EDIT] button to enter the Voice Edit mode.
3
Call up the Common Edit display or Key Edit display.
Key 1 Key 5 Key 10 Key 18 Key 21 Key 73
C0
C1
C6
PRE 1
A. PIANOFAVORITES
PRE 2
KEYBOARD
PRE 3
ORGAN
PRE 4
DRUM
KITS
GUITAR
PLUCKED
ABCD
1234
9101112
ELEMENT PERF. PART ZONE
COMMON
SYN LEAD SYN COMPSYN PAD
CHOIR
CHROMATIC
PERCUSSION
While in the Voice Edit mode, you can switch
between the Common Edit display and the Key
Edit display as shown below.
Indicates a Common Edit display.
Calling up the Key Edit display
Press the Number [1] button to call up the Key Edit
display, then select the key to which the desired
instrument is assigned.
Key Edit (1 – 73)
Indicates the display for editing the key C0.
Calling up the Common Edit display
Press the [COMMON] button to call up the
Common Edit display.
In the Edit mode, the [DRUM KITS] button
functions as the [COMMON] button.
4
Select the desired menu for editing by
pressing the [F1] – [F6] and [SF1] – [SF5]
buttons, then edit the parameters.
5
Repeat 3 – 4 as desired.
6
Name the edited Drum Voice.
7
Store the edited Voice to internal User
memory.
Enter the
desired
Voice name.
EDIT
JOB STORE
COMPARE