Owner`s manual

Quick Guide Creating a Song on the MO
Playing the Demo Songs/Patterns
74
Owner’s Manual
Any of following three types can be set. However, for this example, select “All.”
All ................ Loads both the Demo Song and Pattern data.
Song ............ Loads only the Demo Song data.
Pattern ........ Loads only the Demo Pattern data.
After the data is loaded, the Song Play display is automatically called up.
When playback of the selected Song is finished, the Song
automatically stops.
You can stop the Song anytime during playback by
pressing the [J] (Stop) button. This pauses the Song at
the current position. To resume playback of the Song from
that point, press the [F] (Play) button again. To instantly
return to the beginning of the Song, press the [ IE] (Top)
button.
Move the cursor to “Song Number: Name” (with the cursor
buttons) then select another Song by using the Data Dial,
or the [INC/YES] and [DEC/NO] buttons.
Next, let’s play a Demo Pattern.
2
Set the LoadType to “All.”
3
Press the [ENTER] button to load the Demo data.
01 : Dub'nBass
Song track number and
track mute/solo status
Track data status
Indicates muted track.
Indicates soloed track (page 75).
Indicates that the track has
no recorded data.
Indicates a MIDI track
containing MIDI sequence data.
Location settings for the selected Song
Measure: Beat
(for current playback location)
ARP1-ARP5
Use the [SF1] – [SF5] buttons to call
up the Arpeggio type and Song
Scene assigned to each button
(page 89).
Tempo for the selected Song
Time signature for the selected Song
Transpose setting (for entire Song)
Currently selected Song
Song number
Song name
n The explanations here also apply to the Pattern mode.
4
Press the [F] (Play) button to start Song
playback.
LOCATE
REC
12
SEQ TRANSPORT
LOCATE
REC
12
SEQ TRANSPORT
Top button
Start
Stop
5
Select and play another Demo Song.
DEC/NO INC/YES
LOCATE
REC
12
SEQ TRANSPORT
Increases number
Increases number
Decreases number
Decreases number
Song number: Name
Start