Owner`s manual

Quick Guide Creating a Song on the MO
Creating a Pattern
86
Owner’s Manual
Editing a Pattern Chain
The Pattern Chain Edit mode makes it possible to edit the
order of the Sections in a chain, as well as insert tempo
and scene/mute event data.
Converting a Pattern Chain to Song data
Once you’ve made a Pattern Chain, you can convert the
data and create a Song with it.
The Pattern Chain data is converted to Song data and
copied to the top measure of the destination Song.
This operation overwrites any data already existing at the destination
Song.
The created Song and Pattern data resides temporarily in DRAM (page
150). Because data contained in DRAM is lost when the power is turned
off, you should always store any data residing in DRAM to a USB
storage device before turning off the power.
1
In the Pattern Play mode, select a Pattern for
which data has already been created.
2
Press the [F6] CHAIN button to call up the
Pattern Chain Play display.
3
Press the [EDIT] button to enter the Pattern
Chain Edit mode, then edit each track of the
Pattern Chain.
4
Press the [EXIT] button to return to the Pattern
Chain Play display, then press the [F] (Play)
button to hear the edited Pattern Chain.
5
Save the created Pattern data to a USB
storage device (page 98) before turning the
power off.
EDIT
Press the [F6] button
to clear the event at
the cursor location.
Press the [F5] button to insert
the event to the cursor location.
Press the [F6] button to delete
the event at the cursor location.
Pattern Track Edit
Scene Track Edit
Tempo Track Edit
[F4] button
[F4] button
[F4] button
Enter the desired section
(A – P) or the End mark by
using the [INC/YES] and
[DEC/NO] buttons.
1
In the Pattern Play mode, select a Pattern for
which Pattern Chain data has already been
created.
2
Press the [F6] CHAIN button to call up the
Pattern Chain Play display.
3
Press the [EDIT] button to enter the Pattern
Chain Edit mode.
4
Press the [F3] SONG button to call up the
“Convert to Song” display, then specify the
destination Song.
5
Press the [ENTER] button to execute the
Convert operation.
6
Save the created Song data to a USB storage
device (page 98) before turning the power off.
When this box is checkmarked,
program change messages in the
MIDI sequence data are not
copied.
Destination Song number
and the top measure number
CAUTION
CAUTION