Owner`s manual

Creating a Song

Owner’s Manual

Quick GuideCreating a Song on the MO

Song Chain

This function allows Songs to be “chained” together for automatic sequential playback. In this section, try using the

Song Chain features with the Demo Songs.

1 Press the [F6] CHAIN button to call up the Song

Chain display.

From this display you can program and play your own

custom Song sequences.

2 Program the desired order of the Songs.

Move the cursor to “001” by using the cursor buttons and

select the desired Song by using the Data Dial, or the

[INC/YES] and [DEC/NO] buttons. Likewise, assign the

other Songs to locations 002, 003, 004, and so on.

In addition, the following parameters can be set in the

Song Chain.

3 Play the Song Chain.

Move the cursor to the top of the Song Chain display, and

press the [F] (Play) button to start Song playback.

When the Song Chain programmed in step 2 reaches to

the end, playback stops automatically. Press the [■]

(Stop) button during playback to stop Song Chain

playback.

n The Song Chain can only be played back in the Song

Chain display, and not from any other display.

TIP

skip Skips past (ignores) the selected chain number and

continues playback from the next chain number.

stop Stops Song Chain playback at that chain number. You

can restart Song Chain playback from the next chain

number by pressing the [F] (Play) button.

end Indicates the end mark of the Song Chain data.

LOCATE

REC

SEQ TRANSPORT