User Manual

Mobile Music Sequencer Owner’s Manual 11
Adding notes and Changing velocities
 Adding notes
1. Ensure that is turned on (tap if necessary).
2. Ensure that the note length is set as required at the bottom
of the screen.
3. Tap the screen at the desired pitch position (vertical) and
playback position (horizontal).
A rectangular note of the selected length will be added at the tapped position.
NOTE
A newly added note can be tapped once again to delete it.
 Changing velocities
1. Tap to activate performance data mode.
2. Select [Velocity] from the list displayed.
The velocities of the notes in the phrase or block will be displayed. The taller
the bar, the greater the velocity.
Note
Velocity
3. Turn off .
4. Select the note whose velocity you wish to edit by tapping
it.
The velocity for the just the selected note will be displayed.
5. Turn on .
6. Touch and slide the velocity to change it.
Batch editing velocity, gate time, note shift, and
quantize data
1. Ensure that is turned off (tap if necessary).
2. Select the notes that you wish to edit.
NOTE
For details on selecting multiple notes, refer to Selecting notes.
3. Tap .
4. Select an action from the window displayed and set the
corresponding parameters.
5. Tap [APPLY] to modify the notes selected in Step 2 above
based on the parameters you have set.
The notes’ performance data will now be modified.