User Manual

Saving the Edited Voice
ELC-02/ELCU-M02 Owner’s Manual
140
Saving the Edited Voice
Edited AW M Voices can be saved as User Voices (up to
80).
1 Press the [SAVE] button at the top right
of the display to call up the SAVE Page.
2 Select the User Voice number you wish
to save to.
The message appears to prompt confirmation of the
operation. (Saving a new Voice automatically erases
the Voice previously stored to the selected User
number.)
3 (If necessary) Press the [RENAME]
button to give a name to your original
Voice.
The method for editing the name is the same as the
one for the Song name in the MDR section. (See
page 114 for more information.) Up to sixteen
characters can be entered.
4 Press the [SAVE] button to save the
Voice, or press [CANCEL] to abort the
operation.
After saving the Voice, be sure to quit the Voice Edit
function (page 141) before turning the power off.
Turning off the Electone without quitting Voice Edit
erases the User Voice you have edited.
LFO (Low Frequency Oscillator)
As its name suggests, the LFO creates waveforms of a
low frequency.
These waveforms can be used to vary the pitch, filter
or amplitude to create effects such as vibrato, wah
and tremolo.
The following five waveforms are available.
saw (sawtooth) tri (triangle)
squ (square) rnd (random)
sine
NOTICE
This operation automatically erases any Voice that had
been previously saved to the selected User Voice
number. Be careful not to erase any important data.
Always save your important data in advance to a USB
flash drive using the MDR function.