User Manual

ELC-02/ELCU-M02 Owner’s Manual

181

Connections

On the backside and front left side of this Electone is a separate panel equipped with various input/output

terminals and miscellaneous controls, including a terminal for connecting a Foot Pedal (sold separately).

Accessory Jacks and

Controls

This section provides brief explanations for each jack/

control on the Electone. For details on connecting to

external devices, see page 183.

1 DC IN jack

For connecting the AC adaptor.

2 PHONES jack

For connection of a stereo headphone set. When

headphones are connected to this jack, sound to the

Electone’s speaker system is automatically cut off,

allowing you to play without disturbing others.

Reference page

• Using headphones (page 183)

3 MIC jack

For connecting a mono input, such as a microphone. This

Electone outputs the microphone signal, with reverb

processing, through the OUTPUT jacks or AUX OUT

jacks.

Reference page

• Connecting a microphone (page 185)

4 MIC VOLUME knob

For adjusting the level of input signal from the MIC jack.

5 USB TO DEVICE terminal

For connecting USB storage devices such as USB flash

drive.

3 4