User Manual

Connection Examples – External Devices
ELC-02/ELCU-M02 Owner’s Manual
183
13
Connections
Connection Examples –
External Devices
CAUTION
Before connecting the Electone to other electronic
components, turn off the power to all the components.
Before turning the power of the components on or off, set all
volume levels to minimum (0). Otherwise, electrical shock or
damage to the components may occur.
To use headphones, connect them to one of the PHONES
jacks (standard 1/4" phone jacks).
By using the OUTPUT jacks, you can connect your
Electone to external powered speakers. If you’re
connecting the Electone to a mono device, use only the
OUTPUT L/L+R jack.
NOTE
• When sounding the Electone from the speakers using the
OUTPUT jacks, connecting a set of headphones automatically
disables the sound from the speakers.
• Speakers are not included with the ELCU-M02. Please use
commercially available powered speakers.
Generally, when you use this Electone on stage (in
concert, etc.), you should connect it to a mixer. By using a
mixer, you can easily adjust the volume and tone quality
of each component.
To connect to a mixer, use the AUX OUT jacks of the
Electone. The Electone features two types of AUX OUT
jacks: MAIN and SUB, allowing you to assign some parts
of the Electone's output to the SUB jacks and the other
parts to the MAIN jacks. In this way, you can apply
effects to the specific parts or adjust the volume balance
among the parts with an external mixer. For details, see
“Selecting Outputs for Each Part” on page 184.
AUX OUT of this Electone is a a terminal of LEVEL
FIXED terminal which outputs on a fixed level.
The OUTPUT terminal can be used for connection the
Electone with a mixer.
The OUTPUT terminal can be adjusted the output level
by using the MASTER VOLUME dial.
*The Unbalanced line is intended for line-level signals.
Using headphones
Playing the sounds of the Electone
through an external audio system
PHONES
AUX OUT L/L+R R
Speaker (Left) Speaker (Right)
Using a mixer for live performance
Jacks Output Type
AUX OUT MAIN jacks
L/L+R, R
Unbalanced*
LEVEL FIXED
AUX OUT SUB jacks
1, 2
Unbalanced
LEVEL FIXED
OUTPUT jacks
L/L+R, R
Unbalanced
LEVEL FIXED
R
AUX OUT
(MAIN)
L/L+R 2
AUX OUT
(SUB)
1
Mixer
Main Speakers
(ex. Powered-amp Speakers)
Monitor
Speakers
SoundSound
Sound
Sound
Sound
Other keyboard
MIC.
External
effect
device
Other
Parts
Some
Parts