User Manual

Keyboard Percussion

ELC-02/ELCU-M02 Owner’s Manual

Rhythm/Keyboard Percussion

3 Press the [ASSIGN] button at the top

right in the display to call up the

ASSIGN Page.

4 Press the [KIT CHANGE] button at the

center of the display to call up the

Keyboard Percussion Kit List.

Press the kit name you want to use from the 38

Keyboard Percussion types. For details of percussion

assignments for each kit, see the Preset Keyboard

Percussion List on page 68.

5 Adjust the volume and amount of reverb

applied to the Keyboard Percussion.

Two sliders in the K.B.P. display determine the

reverb and volume settings. To adjust the volume

and amount of reverb, touch the slider in the display

or use the Data Control dial.

The settings here determine the reverb/volume for

the entire Keyboard Percussion setup, not for each

percussion instrument. You can, however, adjust

each percussion instrument’s reverb/volume

(page 81).

6 Play some notes on the keyboards and/

or Pedalboard.

The message “Are you sure you want to reset the

setup data to the default values?” appears when you

change the kit. Select [OK] to clear detailed settings

(made in the SETUP Page) and call up the selected kit

on the panel. Select [CANCEL] to call up the selected

kit without erasing the detailed settings.