User Manual

Saving the Registration Data to USB Flash Drive
ELC-02/ELCU-M02 Owner’s Manual
95
6
Registration Memory
Saving the Registration
Data to USB Flash Drive
The Registration data stored to the Number buttons can
be saved to a USB flash drive connected to the [USB TO
DEVICE] terminal.
Reference page
• Saving Registrations and Other Data to a Unit (page 116)
With the MDR function, up to five Banks of the
Registration Memory stored to internal memory of the
instrument can be saved to a USB flash drive as a single
Song file. Although detailed information about the MDR
is described on chapter 7, these instructions show how to
save the Registration data to a USB flash drive.
1 Insert a USB flash drive into the [USB
TO DEVICE] terminal.
2 Press the [MDR] button on the panel to
call up the MDR display.
3 Select the Song to which you want to
save the Registration data (page 110).
Selecting Disable mode:
The Disable mode enables you to select what is to be
disabled when the [D.] (Disable) button is on. There
are two Disable modes: Normal (rhythm menu,
tempo, etc. are disabled) and Tempo (only tempo is
disabled).
1 Press the [UTILITY] button to call up
the GLOBAL Page of the Utility
display.
2 Press the DISABLE MODE
[NORMAL] or [TEMPO] button.
NORMAL
When the Electone is set to the Normal mode and the
[D.] (Disable) button is on, the following functions
will not change, even when you change the
Registration Memory number.
• Rhythm menu, Rhythm section, Rhythm tempo,
Rhythm volume, Rhythm reverb
• Rhythm reverb time
• Accompaniment volume, Accompaniment reverb,
On/Off status of Accompaniment parts
• A.B.C. mode, A.B.C. memory
• M.O.C. mode, Foot Pedal control for M.O.C.
• Second expression pedal control for rhythm tempo
TEMPO
When the Electone is set to the Tempo mode and the
[D.] (Disable) button is on, the rhythm tempo will
not change, even when you change the Registration
Memory number.
Disable mode