User Manual
Table Of Contents
- Supported Models
- Supported iOS Devices and iOS
- Yamaha Applications for Piano & Keyboard Instruments
- Contents
- NOTICE
- Information
- Determining the Connection Type
- Connecting the Electone to an Access Point Using a USB Wireless LAN Adaptor (Connection A)
- Connecting Directly Using a USB Wireless LAN Adaptor (Connection B)
- Troubleshooting Problems with Wireless LAN Connections
- Connecting to an iPhone/iPad Using a Cable (Connection C, D, E, F, G, H)
- Glossary of Terms
- About Using BSD-Licensed Software
iPhone/iPad Connection Manual
9
Automatic Setup by WPS
If your access point supports WPS, you can easily connect the Electone to access point by WPS, without
making settings, such as password input, etc.
NOTE Check whether your access point supports WPS by referring to the owner’s manual for the access point you are using.
1 As illustrated, press the [WPS] button via the display of the Electone.
2 Press the WPS button on your access point within two minutes after step 1 above.
NOTE For details about the operations in the setting of the access point, read the owner’s manual for the product you are
using.
Example display from ELS-02/ELS-02C (including Vitalize unit): [UTILITY] button [WIRELESS LAN]
Press the WPS button on your access point.